How To Make Homemade Physiological Serum

How to make homemade physiological saline

Saline is a Saline solution composed of water and salt. For this product to be considered physiological, and not simply water with salt, it must contain 9 grams of sodium chloride (salt) for each liter of water.

In this way, it can be applied without risk or stinging problems on eyes, mucous membranes or wounds. Are you having a cold and nasal congestion does not allow you to lead a normal life? Do you need to clean your baby’s legañas with a gentle and innocuous product? In this oneHOWTO article we show you how to make homemade saline Step by Step. Take note!

What is physiological saline for?

The physiological saline solution or saline solution is used by health professionals for the rapid rehydration of the body through the intravenous route, but do you know the uses you can give to physiological saline in your day-to-day life? Do not lose detail of the main domestic applications and uses of saline solution.

Nasal physiological serum

Using physiological saline for babies is effective for relieve congestion one of the smallest, as it does not cause irritation or stinging. Snot builds up in the nose and makes it difficult to breathe, since babies only breathe through their noses up to 6 months. The physiological saline not only serves to eliminate mucus and clear the nose, but also hydrates the mucous membranes thus reducing dryness and helping them breathe better.

Physiological eye serum

This solution can be applied to the eyes without fear of stinging and is perfect for eye cleaning. If you have conjunctivitis problems, apply saline solution to clean the eye before proceeding with the treatment. The serum is also indicated to clean the area in newborns when it is difficult for them to open them well or they may feel discomfort due to lagañas or dry tears.

Has something ever got into your eye and you started rubbing it to try to get rid of the foreign body? This is common and the rubbing motion with your hands may cause more damage to the eye than what was bothering you. In these cases you can also apply physiological saline to clean.

Physiological serum to clean wounds

If you have a wound or burn, before disinfecting it you can use physiological saline to clean the wound of dust or dirt. We recommend cleaning the wounds with gentle movements from the inside out to remove as much dirt as possible from the injured area.

How to make physiological saline at home – step by step

You know how to make homemade serum at home with just 3 steps? The preparation is very simple and you only need:

  • 550 milliliters of clean water
  • 4.5 grams of salt
  • 1 pot with lid
  • 1 airtight container

Before starting the preparation, you need to sterilize the container where you will store the serum. Discover How to sterilize the cans by clicking on the link. You will see how easy it is to make your own physiological saline at home, take note!

  1. Heat 550 milliliters of tap water in a pot and bring it to a boil. If your tap water is not clean, you can use potable water, but try to use one with the lowest concentration of minerals possible.
  2. Add 4.5 grams of table salt (the one you use for cooking) to the water and stir until it is dissolved in the water.
  3. Remove from the heat and, without letting it cool, pour the solution into a container that can be hermetically closed.

This solution should remain closed when not in use and should be used as cool as possible (between 24 and 48 hours). As a recommendation, at oneHOWTO we advise you to use this homemade solution only for perform nasal rinses. The reason for this is that tap water can contain impurities such as lime or chlorine and is not entirely sterile, so we suggest you do not use this solution to clean open wounds or to apply to the eyes.

If you are looking to prepare homemade oral serum for hydration or to alleviate digestive problems, you will only need to add a little sugar and lemon juice. Discover in our article How to prepare homemade oral serum all the steps you need to achieve it.

How to make saline at home - How to make saline at home - step by step

How to put a physiological saline

The most frequent question among new parents is that of how to apply physiological saline to babies. At oneHOWTO we tell you not only how to do nasal washes, but how to wash your little one’s eyes and how to proceed in washing wounds and burns with physiological saline. Keep reading!

Nasal washes

To do the nasal wash for babies or children you will need physiological saline in single doses (if it is a large bottle you need a syringe to remove the product and be able to apply it with some pressure in the hole) and a nasal aspirator or bulb. The correct way to apply physiological saline to remove mucus is as follows:

  1. Depending on whether you are applying it to yourself or someone else, lie down or lay the child on one side and apply physiological saline to the nostril.
  2. Repeat on the other side and sit up or sit up immediately to expel the mucus.
  3. If it is a baby, this is the time when you can use the goatee or nasal aspirator gently to help with the expulsion of the snot.

It’s advisable do not abuse the utensils to clean the nose, such as the knob and the vacuum cleaner. It is preferable to leave it only for when the baby is congested and never use more than twice a day so as not to cause irritation. On the contrary, serum washes can be applied frequently as they are safe for the baby.

When to perform nasal washes? At oneHOWTO we advise you to do them after bathing, since the baby is more relaxed and the nasal mucosa is also more hydrated. Another good time to do it is before eating since, by decongesting the area, food intake is facilitated and your baby will eat better.

Find other techniques to clear the nose of your little ones in our article How to decongest the nose in children.

Eye washes

If your baby has woken up with eyes full of dry eyes and tears, you can clean the area with saline solution and gauze pads. To treat an area as delicate as the eyes, we need a sterile product, therefore, we recommend using single-dose serum, since you only use what you need and the product does not remain open. The cleaning procedure is as follows:

  1. Wash your hands.
  2. Apply a few drops of saline around the eye to soften the legañas.
  3. Take a clean gauze and rub gently around the eye to gradually remove the remains.

Clean wounds

To clean wounds or burns, you must apply physiological saline on the wound and gently clean with a sterile gauze. You should make smooth movements, not friction, and clean from the inside out.

How to make homemade physiological saline - How to put a physiological saline

This article is merely informative, at oneHOWTO we do not have the power to prescribe any medical treatment or make any type of diagnosis. We invite you to see a doctor in the case of presenting any type of condition or discomfort.

If you want to read more articles similar to How to make homemade physiological saline, we recommend that you enter our Healthy Life category.