How to CLEAN the Car Dashboard

How to clean your car dashboard

The dashboard is the entire front plate of the interior of a car. At the top is the dashboard and steering wheel, while at the bottom are the brake, accelerator and other vehicle components. Its name comes from horse carriages, as they had a cover that prevented mud and water from splashing the driver and passengers.

Although not used for this today, the car dashboard is one of the interior components that is most affected by wear and tear and dirt. In this oneHOWTO article, we explain the best methods to know how to clean the car dashboard effectively. Leave your vehicle like new!

How to clean a car dashboard with soap and water

If you want to clean the car with what you have on hand, soap and water will always be perfect for this task. The front part of the interior of the car is usually cleaned with these products, however, many people do not obtain good results when using them, because they are not clear how to clean the interior of the car.

To obtain them, take into account that you must dedicate enough time to each part of the dashboard so that it is clean. Next, we are going to explain a step by step of how to clean the car dashboard with soap and water:

  1. Wipe the dash with a dry cloth. If you have a vacuum cleaner, vacuum it to remove as much accumulated dirt or dust as possible.
  2. Mix water and mild soap in a bucket. You can also use the commercial shampoo that they sell to clean cars.
  3. Take a microfiber cloth and rinse it with this preparation. Squeeze it out before running it over the dashboard, as excess water can drip onto an electronic or metal component and damage it.
  4. Wipe the rinsed cloth very carefully over each part of the dashboard. In the wide parts of the board you can do it in a circular way. Make sure to remove sticky spots and spots well. If you find stubborn stains, you can use a plastic sponge to remove them, but don’t use too much force to avoid scratching it.
  5. Every time you go to wipe a part that you have not cleaned, rinse the cloth and wring it out.
  6. Don’t forget to clean hard-to-reach parts, like air conditioning vents. For this, use soft bristle toothbrushes that you no longer use or small brushes. Visit our article How to clean the air conditioning of the car for more instructions.
  7. Take a cotton cloth that is completely dry and wipe it all over the dashboard or dashboard of the car, and make sure it is very dry. If necessary, wipe it with another dry cloth until it is done, this will prevent stains and the appearance of fungus on the surface of the dashboard.
  8. Using this cleaning method, you will get a matte finish. To give the dashboard its original shine, you must spray it with a specific polish for plastics or wood. Let this product dry for about 5 minutes and wipe it completely dry until it is shiny.
How to clean the car dashboard - How to clean the car dashboard with soap and water

How to clean a car dashboard with ammonia

The dashboard of the car is one of the parts of the car where a large amount of dust accumulates that enters when opening the car windows. Likewise, it tends to get dirty when we place things on it and when we put dirty or greasy hands on it.

Its appearance leaves a lot to say about the driver of the vehicle. That is why it is recommended that you do a deep cleaning frequently. One of the most recommended tricks for clean car interior and the dashboard is to use ammonia.

This product is industrially made and comes in many cleaning products. However, it is a product that can be harmful to health if proper precautions are not taken when using it. Next, we explain how to use ammonia to clean the dashboard of a very dirty car:

  1. Make a mixture of ammonia and water. Use 2 caps of ammonia for every liter of water. You can use any ammonia to prepare this mixture.
  2. Vacuum or dust the dashboard with a cotton cloth.
  3. Put on a mouth cover so you don’t breathe in the ammonia smell and wear gloves.
  4. Use a lint-free cloth like microfiber rags. Soak it in the ammonia-water mixture, but make sure it doesn’t drip or drip.
  5. Start cleaning the dashboard of the car for the largest parts, rubbing them with this cloth in a circular way. The idea is to remove stains and dirt, but without scratching the upholstery.
  6. Clean the most difficult to access parts with small toothbrushes. You can also wrap the tip of a screwdriver in the cloth for a more thorough cleaning.
  7. Dry the dashboard with a cotton cloth.
  8. Let the dashboard dry with the windows open for about 10 minutes and wipe it with another dry cloth to give it a natural shine.

Since ammonia is a powerful cleaner and disinfector, this product is perfect for clean sticky car dashboard. Discover more ways to take advantage of ammonia in cleaning in our article 10 uses of ammonia.

How To Clean Car Dashboard - How To Clean Car Dashboard With Ammonia

How to clean a car dashboard with glycerin

Glycerin is a colorless, odorless and non-toxic product with a viscous consistency. When used, the tabletop achieves a glossy finish with a protective layer against dust and stains. Next, we explain how to use the glycerin to clean the car dashboard:

  1. Mix 400 ml of water with 30 ml of glycerin and shake until you get a homogeneous mixture.
  2. Pour the mixture into a spray bottle or spray bottle. You can add a few drops of air freshener to obtain a pleasant smell when cleaning the car.
  3. Vacuum or dust the dashboard with a cotton cloth.
  4. Spray large areas with the product and wipe with a microfiber cloth to remove accumulated stains and grime from the dashboard.
  5. Repeat this procedure in the most difficult access parts, use a soft bristle brush.
  6. Let dry for 5 minutes and wipe with a dry cotton cloth to give the car dashboard more shine.

Once the dashboard is flawless, it’s time to move on to other parts of the car. Visit our article How to clean the upholstery of the car and leave it as the first day.