How to bleach hair with hydrogen peroxide

Bleaching is always an aggressive process for hair, so take certain precautions It will be essential to achieve the best result without putting the health of your hair at risk. If you are going to bleach your hair with hydrogen peroxide, pay attention to these tips.

• First you will have to decide the tones that you want to lighten your hair, because depending on the natural tone of your hair we will decide what type of hydrogen peroxide is better or, even, if you have to do it in more than one session.
• It is preferable to be patient so that things go well; Therefore, if you have previously dyed your hair or have undergone a hair treatment, it is better to wait a reasonable time before subjecting it to bleaching. The usual thing is to wait between 30 and 45 days.
• In the days before bleaching it is advisable to use hair products that are as natural as possible, for example sulfate- and paraben-free shampoos and silicone-free conditioners.
• Keep in mind that the drier and more damaged your hair is, the more it will suffer from discoloration, so it is advisable to apply a moisturizing or nourishing mask in the days prior to treatment. Cheap and effective homemade masks can be made using ingredients such as olive oil, almonds, egg yolk, or avocado. In this oneHOWTO article we explain in detail how to make a nourishing hair mask.
• Likewise, you should think that every time we wash our hair we eliminate the protective barrier that is our natural fat, that is why we also recommend do not over wash hair during the days before discoloration.
• Avoid making him suffer with the use of blow dryers, straightening irons or curling irons.

Hydrogen peroxide or hydrogen peroxide is an ideal product if you are looking for cheap and easy ways to bleach hair at home. However, you must bear in mind that this process requires some planning and careful application, since, once bleached, the hair loses its natural tone and does not regain it. We explain how to bleach your hair with hydrogen peroxide in six simple steps:

1. Prepare the products you will need: plastic gloves, a spray container, aluminum foil, comb, hairpins or tweezers to hold the strands, a plastic cap, cotton, micellar water or some moisturizing oil for the skin and several towels.
2. Wash your hair as you normally do to remove any traces of dirt or products and let it air dry. It must be completely dry before applying the hydrogen peroxide.
3. As a precaution, test a strand. You can use a cotton ball soaked in hydrogen peroxide and moisten the lock with it. Wait until you see that it reaches the desired tone and then you will know how long you have to leave the hydrogen peroxide on the hair. If you have chosen the right hydrogen peroxide, 20 or 30 minutes should be enough; you can leave it a little longer if you think it is necessary, but if what you want is lighten black hair until you get a very light blonde, you will probably have to do it with several applications.
4. You must be clear about what type of lightening you want: you can bleach the hair completely, give some illuminating reflections, do Californian highlights, etc. Whatever it is, you should do it little by little, separating the hair into small sections to achieve a homogeneous result and not forgetting any area.
5. Put a towel around your shoulders so you don’t stain your clothes. Separate each strand, apply the hydrogen peroxide with a vaporizer, and then separate the strand with the help of a tweezer or hairpin. If you want well-defined locks, you can prevent the hydrogen peroxide from bleaching the outside of the lock by wrapping the bleached lock in aluminum foil.
6. When you have finished applying the hydrogen peroxide, put on the plastic cap and wait the time we have indicated before removing it. Leave the hydrogen peroxide only long enough to prevent hair from burning. If you have stained the skin on your face or arms, clean it with a cotton ball soaked in micellar water or a moisturizing oil.
7. To remove the hydrogen peroxide, you just have to rinse your hair well with warm water and wash it as you normally do. To strengthen it, you can apply a nourishing mask and, thus, help your hair to recover from discoloration. Let it air dry.

You may be thinking of using specific hydrogen peroxide for wounds, the kind you always have at home, but first you should know what is your concentration. When choosing the hydrogen peroxide that you are going to use, you must pay attention to its volumes; This refers to the concentration of hydrogen peroxide in the product, since there is hydrogen peroxide of 10, 20, 30 and 40 volumes.

If you already have light hair or you just want to give your locks some highlights (1 or 2 shades lighter than your natural color) you should opt for 10-volume hydrogen peroxide. If you have dark hair and are looking for a more intense discoloration, choose the 20-volume hydrogen peroxide.

It is not advisable to use oxygenated water with a higher concentration as a hair lightener, since they would spoil the hair a lot and they could even cause skin and scalp irritation.

If you are not convinced by the use of hydrogen peroxide to lighten your hair at home, you can try using other types of products such as bleaching powders or dyes with or without ammonia. Although it is true that both options are valid, from UNCOMO we advise you to go to a professional beauty center to make use of them, especially if you have no experience or if you have never bleached your hair before.

In case you are completely sure, do not miss this other article on How to bleach your hair at home without damaging it, as you will find essential tips and instructions.

If you want to read more articles similar to How to bleach hair with hydrogen peroxide, we recommend that you enter our Beauty and Personal Care category.