
There are times when we want to keep track of our body measurements, either out of curiosity, to control our volume and check if the diet has been effective or to be able to make a custom-made suit or dress, for example. Knowing your body measurements will allow you to guide yourself in diets or workouts as well as make your own clothes or ask a dressmaker to do it.
You want to know how to take body measurements correctly? Take a tape measure and follow the instructions that we present in oneHOWTO to discover the body measurements area by area and step by step.
What to know before taking body measurements
Before taking measurements of any body, some considerations should be taken into account. For example, the stakeholders in question should bring clothes as light and thin as possible so that the tape fits well to your body and, if you are alone or alone at home, we advise you to remove your clothes to find the exact result.
Likewise, all measurements should be taken standing up, barefoot and in an upright position. We also recommend always use a flexible tape measureAs metallic ones limit movement and curvatures, essential for measuring waist, hip, bust and shoulder circumferences.
On the other hand, we advise you to print a measurement sheet to be able to take note of each of the results without fear of being wrong. Next we offer you a table and we help you take body measurements correctly.

How to take shoulder measurements
To take the correct shoulder measurement, we need to know how much is the width. For this, two key points must be identified: the one that marks the transition between the neck, shoulder and arm and the one that indicates the end of the shoulder.
- For the base of the neck, look for a small indentation that sits just before the shoulder curve at the top. Press with your hands until you find it.
- To locate the end of the shoulder, you must look at the acromion, the bone that tends to protrude and marks the point where the shoulder and the arm meet. If the acromion of the shoulder to be measured is not visible to the naked eye, rotate the arm in various directions while feeling the point with your fingers until the bone is protruding.
Once you have obtained the points, measure the space between them using a tape measure. You should keep in mind that the meter cannot be straight, but rather should bend slightly as is the case with the curve of the shoulders to obtain the correct measurement.
You can also measure your shoulders from the front, placing the tape measure horizontally, from shoulder to shoulder, about 1 inch from the neck.
How to take arm measurements
To find out how much the circumference of your arms is, you must place the tape measure in the center of the biceps muscle. That is, you should place it just halfway between the elbow and the shoulder. This circumference will give you arm width measurement.
If what you want is to measure arm length, you should place the tape measure over the shoulder and down the arm until it reaches the tip of the middle finger of the hand. The resulting measurement will correspond to the length of your arm.
If you want to measure the span of your arms, stand up with your back against a wall and extend your arms in a cross. Your helper should place the tape measure between the tip of the middle finger of the left hand to the tip of the middle finger of the right. In this way you will know the total length of both arms.

How to measure your chest
You ask yourself how to measure bust correctly? To take measurements of the chest you must stand up and place the measuring tape around the bust, just at the height of the bra, making the same circumference.
The tape should be placed around the chest, under the arms and above the most prominent part of the bust. The point where the tape measure meets the circumference will be the mark that will indicate the measurement of your chest.
How to measure your waist
To measure your waist circumference, you must perform a similar process to measuring your chest. This involves placing the tape measure around your waist, just above the top of your hipbone, at the level of your belly button, approximately. If you wonder what the difference between hip and waist is, keep in mind that waist is the narrowest part of the torso and it is usually quickly identified because the meat sinks in on both sides, marking the waist.
- Once your waist is located, stand up straight.
- Surround the waist with the measuring tape, circling the abdomen and back.
- Keep the ends of the tape at your belly button, and when they come together, you can check the measurement of your waist.
- Remember that the tape measure must be straight at all times.
To obtain the correct measurement of the waist we recommend run the process twice. If the result matches, the measurement is correct, but if both measurements vary, repeat the process a third time and take an average with the three measurements.

How to measure hip
Do you locate where the hip is? If you want to measure this part of the body, you should know that the hip is located just below the waist. Although there are different types of hips and depending on the weight, some may cost more to see with the naked eye than others, the hips are usually the most prominent and wide part of the torso. Also note that the hip measurement includes the rear part.
- You should go around your hips with the tape measure, placing it at the widest point.
- To do this, we recommend removing your clothes, so the measurement will be more exact.
- Hold the end of the tape to the side of your hips and wrap the tape around your body until both ends meet.
- Remember that the tape must be straight at all times. The result will be the measurement of your hip.

How to take leg measurements
To measure the total length of the legs, you will need to place the end of the tape measure to one side, at the height of the waist. From that starting position, drop the tape down your hip to your ankle. The measurement that marks the tape will correspond along the leg.
In case you want to know the measurement of your thighs (the widest area of the legs), you will need to wrap the tape measure around the thickest part of your thigh, that is, the top, just below the buttocks. Read the figure that appears when you join the tape measure at the starting point and discover the measurement of the contour of your thighs. If you also want to know the length of the thighs, stretch the tape between the knees and the bottom of the buttocks, at the back of the leg.

How to Take Back Measurements
To know the measurements of the back it is necessary to discover the length and width of it.
- The length of the back waist, that is, back length, should be measured by placing the end of the tape measure at the base of the neck, where you will find a protruding bone as a reference point (the first cervical vertebra).
- Slide the tape measure up to the waist in a straight line. When you reach the waist, read the measurement obtained, as it will correspond to the length of the back.
- To measure the width of the back You should place the tape measure at the birth of one of your arms, at the widest part of your back and at shoulder height. Lay the tape measure from shoulder to shoulder in a straight line to reveal your back width measurement.
You may also be interested in this article on How to make a tailored suit.

If you want to read more articles similar to How to take body measurements, we recommend that you enter our Fashion and Style category.